Engineering, 27.12.2019 04:31 Jaymp2706jj
Apiece of wire is to be bent in the form of a rectangle to put around a picture frame. the length of the picture frame is 1.5 times the width. write a program that prompts the user to input the length of the wire and outputs the length and width of the picture frame
Answers: 3
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Apiece of wire is to be bent in the form of a rectangle to put around a picture frame. the length of...
Geography, 18.09.2019 02:30
English, 18.09.2019 02:30
Mathematics, 18.09.2019 02:30
Mathematics, 18.09.2019 02:30
Biology, 18.09.2019 02:30
Social Studies, 18.09.2019 02:30
Mathematics, 18.09.2019 02:30