subject
Engineering, 25.12.2019 06:31 leapfroggiez

The radiant energy incident on the earth's surface on a sunny day is roughly 900.0 w/m2. collecting and focusing sunlight and using the focused beam to heat a fluid is an old idea, and as the environmental costs of fossil-fuel combustion mount, solar heating becomes an increasingly attractive alternative. suppose a house is to be designed that will have a circulating forced-air central-heating unit, and solar energy is contemplated as a heat source (backed up with a conventional furnace to be used on cloudy days). if air is to be fed at a rate of 2000.0 m3/min at 30.0°c and 1 atm, and the air is to be heated to 60.0°c before being discharged into the living space, what is the required area of the solar collector plates? assume 30.0% of the radiant energy incident on the plates is used to heat the air.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
question
Engineering, 04.07.2019 19:20
A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.
Answers: 1
You know the right answer?
The radiant energy incident on the earth's surface on a sunny day is roughly 900.0 w/m2. collecting...
Questions
question
Geography, 01.08.2019 04:10
question
Mathematics, 01.08.2019 04:10
Questions on the website: 13722363