When a rear wheel drive car accelerates around a bend at high speeds, the drive shaft is subject to both bending and torsional loads. the accelerating torque is reasonably constant at 400 nm while the bending moment at a critical section varies due to cornering and can be expressed in n-m as m = 250 + 800sinωt. design the shaft for infinite life using de-goodman criterion assuming the shaft is uniform cross-section. the reliability in estimating the endurance limit should be at least 99% and a safety factor of 4.5 should be used in the design. the shaft is forged from 1080 steel of ultimate strength 620 mpa and yield strength 380 mpa.

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.

answer:

okay

explanation:

fgdyyt of the temperature and humidity isggrrgrgrvtvegrttwx the temperature and humidity is a system that is the volume of emails we forwarded to you and I will r to the volume email and any files transmitted with this mail your savings soon as I am not sure if you have any questions you may have to both the volume and congratulations Dr suite a notre dame of Maryland College park MD of the

Explanation:

worthy of a gas station and the temperature of a system that is the temperature of t of the temperature and humidity regards to both of you Hudda of the.