Two steel plates are to be held together by means of 16-mm-diameter high-strength steel bolts fitting snugly inside cylindrical brass spacers. knowing that the average normal stress must not exceed 201 mpa in the bolts and 142 mpa in the spacers, determine the outer diameter of the spacers that yields the most economical and safe design.

24.87 mm

Explanation:

The area of the bolt is given by

Since diameter is 16mm, the radius is 16/2= 8 mm= 0.008 m

Area,

For safe design of the bolt, we use stress of 201 Mpa

where P is the load and is normal stress.

Making P the subject then

Substituting the figures given and already calculated area of bolt

The area of spacer is given by

where r is radius and the subscripts o and I denote inner and outer respectively

The value of 142 Mpa by default becomes the stress on spacer hence

and making the subject then  

Since we already calculated the value of P as 40413.4479 N and inner radius is 8mm= 0.008 m then  

Therefore,

unlike the threaded fasteners which are used to clamp the machine members, power screws are used to transmit power. common applications of power screws are: screw jacks: to lift weight. lead screw of lathe: for axial movement of tool and its precise positioning.