subject
Engineering, 20.12.2019 23:31 Tyrant4life

Consider a wastewater effluent (qw = 1 m/s) with a lo = 75 mg/l and 2.0 mg/l of dissolved oxygen that is discharged into a river that has a flow rate of 8.7 m/s and a flow velocity of 2.0 ft/sec. the river just upstream of the discharge has a dissolved oxygen concentration of 7.0 mg/l and a lo of 4.7 mg/l. the temperature of the river is 15 °c and the temperature of the wastewater discharge is 24.7 °c. the deoxygenation rate constant (base e) is 0.20 d at 20°c; the reaeration rate constant (base e) is 0.50 dat 20 °c. the bod rate constant (base e) is 0.20 d at 20 °c. assume that the thetas for rate constant temperature corrections are 1.047 for all rate constants. assume sea level and fresh water conditions. a. determine the initial oxygen deficit (mg/l) and the ultimate bod, lo (mg/l) just downstream from the discharge after blending b. the time (days) and distance (miles) to reach the minimum dissolved oxygen concentration. c. the minimum dissolved oxygen concentration (mg/l) d. the dissolved oxygen that could be expected 50 miles downstream from the discharge (mg/l). e. use excel to create a graph of do vs. time. note that this is y vs. x. be sure to label the y and x axis including units and show the excel spreadsheet used to create your graph. the work you show in your calculation in partc will serve as your sample calculation.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
Consider a wastewater effluent (qw = 1 m/s) with a lo = 75 mg/l and 2.0 mg/l of dissolved oxygen tha...
Questions
Questions on the website: 13722363