subject
Engineering, 20.12.2019 19:31 nkazmirski5598

Ashell-and-tube heat exchanger with two tube passes is to heat 20,000 kg/h of water from 25 to 84oc by hot engine oil flowing through the shell. the oil makes a single shell pass, entering at 160oc and leaving at 94 oc, with a heat transfer coefficient of 500 w/m2×k. the heat exchanger contains 100 steel tubes of 22.9-mm inside diameter and 25.4-mm outside diameter. the inside heat transfer coefficient is 3210 w/m2×k. neglecting fouling coefficients, determine the required tube length.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
question
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
Ashell-and-tube heat exchanger with two tube passes is to heat 20,000 kg/h of water from 25 to 84oc...
Questions
question
Biology, 07.01.2020 12:31
question
Chemistry, 07.01.2020 12:31
Questions on the website: 13722362