subject
Engineering, 20.12.2019 05:31 bvbbridesmaid5519

Acompression spring is needed to fit within a 1-in diameter hole. to allow for some clearance, the outside diameter of the spring is to be no larger than 0.9 in. to ensure a reasonable coil, use a spring index of 8. the spring is to be used in a machine by compressing it from a free problem 10–23 clamping fixture. workpiece slot pin spherical washer clamp screw clamp groove bud98209_ch10_509-560.indd page 555 10/28/13 11: 28 am f-494 /204/mh01996/bud98209_disk1of1/0073 398209/bud98209_pagefiles 556 mechanical engineering design length of 3 in to a solid length of 1 in. the spring should have squared ends, and is unpeened, and is to be made from music wire. (a) determine a suitable wire diameter. (b) determine a suitable total number of coils. (c) determine the spring constant. (d) determine the static factor of safety when compressed to solid length. (e) determine the fatigue factor of safety when repeatedly cycled from free length to solid length. use the gerber-zimmerli fatigue-failure criterion.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
You know the right answer?
Acompression spring is needed to fit within a 1-in diameter hole. to allow for some clearance, the o...
Questions
question
History, 03.12.2020 06:30
question
Biology, 03.12.2020 06:30
Questions on the website: 13722360