subject
Engineering, 20.12.2019 00:31 ligittiger12806

Dexter industries purchased packaging equipment on january 8 for $72,000. the equipment was expected to have a useful life of three years, or 18,000 operating hours, and a residual value of $3,600. the equipment was used for 7,200 hours during year 1, 5,400 hours in year 2, and 5,400 hours in year 3. required: 1. determine the amount of depreciation expense for the three years ending december 31, by (a) the straight-line method, (b) the units-of-activity method, and (c) the double-declining-balance method. also determine the total depreciation expense for the three years by each method. round the final answers for each year to the nearest whole dollar.1) find the force transmitted by the coupling between the nozzle and hose. 2) indicate whether the coupling is in tension or compression. 3) find the velocity of water flowing through the hose.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:20
Air flows over a heated plate Ă t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
question
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
question
Engineering, 04.07.2019 19:20
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
You know the right answer?
Dexter industries purchased packaging equipment on january 8 for $72,000. the equipment was expected...
Questions
Questions on the website: 13722363