Engineering, 19.12.2019 02:31 Decaide

Consider an nmos transistor with vth = 0.4 v, kn = 140μa/v2 , length, l = 0.25μm, and width, w = 1.25μm.

(a) given that vgs = 1v, determine the range of values of vds for which the device is in the saturation region.
(b) given that vgs = 1v, determine the range of values of vds for which the device is in the triode/linar region.
(c) plot ids vs vgs for operation in the saturation region. ignore channel length modulation i. e. assume that λ = 0. for the following parts, you will try to "size" the transistor to meet your needs i. e. choose its length and/or width.
(d) keeping the transistor length the same i. e. l = 0.25μm, what width, w, should you choose such that ids = 252μa when vgs = 1v and vds = 1.0v. again, assume that λ = 0.
(e) keeping the transistor length the same i. e. l = 0.25μm, what width, w, should you choose such that the on resistance of the transistor (i. e. in the triode region) is ron = 3kω. note: round the width to the nearest 0.05μm.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

You know the right answer?

Consider an nmos transistor with vth = 0.4 v, kn = 140μa/v2 , length, l = 0.25μm, and width, w = 1.2...

Questions