Engineering, 18.12.2019 21:31 stephaniero6

Select which observations apply to pure bending moments. group of answer choices

a. stress caused by this type of loading is uniform throughout cross-section
b. strain is experienced during loading
c. no shear stress experienced due to this type of loading
d. max stress occurs on boundary of cross-section
e. no stress occurs on boundary of cross-section
f. this type of loading can cause tensile and compressive normal stresses simultaneously
g. stress caused by this type of loading is not uniform throughout cross-section
h. induced stress is inversely related to the area moment of inertia
i. induced shear stress is proportional to torque acting on the cross-section
j. neutral axis in member experiences no strain

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:20

The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window

Answers: 3

Answer

Engineering, 06.07.2019 03:20

An air-conditioning system consists of a heating section and an evaporative cooler. air enters the heating section at 10°c and 70 percent relative humidity at a rate of 30m^3/min, and it leaves the evaporative cooler at 20°c and 60 percent relatively humidity. if the air conditioning system operates at a total pressure of 98 kpa, determine (a) the temperature and relative humidity of the air when it leaves the heating section, (b) the rate of heat transfer in the heating section, and (c) the rate of water added to air in the evaporative cooler

Answers: 2

Answer

Engineering, 06.07.2019 05:10

Agas contained in a piston-oylinder assembly is initially at p1=100 ibf/ft^2? and occupies a volume of 3.75 ft. the gas is compressed to a pressure p2=500 ibf/ft^2 and a final volume of 0.5 ft. during the process, the relationship between pressure and volume is given as p= a +bv, where a and b are constants a)-determine the values and units for a and b b)-determine the volume, in ft, at an intermediate state where the pressure is 300 ibt/t2.

Answers: 2

Answer

You know the right answer?

Select which observations apply to pure bending moments. group of answer choices

a. str...

Questions