subject
Engineering, 18.12.2019 18:31 gingerham1

The soil at a borrow area is at a moisture content of 10.5% and has a unit weight of 117.5 lb/ft3 . this soil will be used for a fill where the required dry unit weight is 122 lb/ft3 , and the required moisture content is 12.0%. if the finished volume of the compacted fill is 80,000 yd3 , what would be the volume of soil removed from the borrow pit?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
You know the right answer?
The soil at a borrow area is at a moisture content of 10.5% and has a unit weight of 117.5 lb/ft3 ....
Questions
question
Mathematics, 29.06.2020 04:01
question
Mathematics, 29.06.2020 04:01
question
Biology, 29.06.2020 04:01
question
Mathematics, 29.06.2020 04:01
question
Mathematics, 29.06.2020 04:01
question
Mathematics, 29.06.2020 04:01
Questions on the website: 13722363