subject
Engineering, 18.12.2019 02:31 sunny1211

An interesting observation made by the firefighters was that some parts of the forest seemed to escape the flames. the crown fire would drop down into a ground fire in these areas, and then jump back up into the canopy as the fire burned into adjacent areas. they observed that many of these areas had previously been thinned, which means that some of the trees were cut down and hauled away to be used as timber. in other areas, thinned forests burned with as much severity as the unthinned forest. your objective is to design an observational study to answer the question: what was the determining factor for areas that escaped the worst impacts of the fire, compared to areas that were severely burned? select the best hypothesis and prediction that follow from the question you’re trying to answer. for getting started, see the hints.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
You know the right answer?
An interesting observation made by the firefighters was that some parts of the forest seemed to esca...
Questions
Questions on the website: 13722359