Engineering, 13.12.2019 22:31 brae0

Airflow through a long, 0.25-m-square air conditioning duct maintains the outer duct surface temperature at 10°c. if the horizontal duct is uninsulated and exposed to air at 35°c in the crawlspace beneath a home, what is the heat gain per unit length of the duct? evaluate the properties of air at 300 k. for the sides of the duct, use the more accurate churchill and chu correlations for laminar flow on vertical plates.

a. what is the rayleigh number for free convection on the outer sides of the duct? b. what is the free convection heat transfer coefficient on the outer sides of the duct, in w/m2·k? c. what is the rayleigh number for free convection on the top of the duct? d. what is the free convection heat transfer coefficient on the top of the duct, in w/m2·k? e. what is the free convection heat transfer coefficient on the bottom of the duct, in w/m2·k? f. what is the total heat gain to the duct per unit length, in w/m?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 06.07.2019 04:20

Consider the transfer function for a first-order system g(s)=12(s+7)/(s^2+2s+9) for this system determine: a) poles and zeros of the function, b) the natural frequency and damping ratio, c) the peak value achieved in response to a unit step input, d) the peak time for a unit step input, e) the steady-state system response to a unit step input

Answers: 2

Answer

You know the right answer?

Airflow through a long, 0.25-m-square air conditioning duct maintains the outer duct surface tempera...

Questions