Engineering, 12.12.2019 05:31 skylar1315
Acantilever beam is subjected to a concentrated service live load of 25.000 lb(111 kn) acting at a distance of 3 ft 6 in.(1.07m) from the wall support. its cross section is 10 in. times 20 in. with an effective depth d = 17 .(432 min). design the stirrup needed. f_c = 3000 psi (20.7 mpa), normal-weight concrete f_y = f_yt = 40,000 psi(275.8 mpa)
Answers: 2
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Acantilever beam is subjected to a concentrated service live load of 25.000 lb(111 kn) acting at a d...
Mathematics, 18.10.2020 15:01
Mathematics, 18.10.2020 15:01
English, 18.10.2020 15:01
Mathematics, 18.10.2020 15:01
English, 18.10.2020 15:01
Mathematics, 18.10.2020 15:01
Chemistry, 18.10.2020 15:01
Mathematics, 18.10.2020 15:01
Mathematics, 18.10.2020 15:01
Mathematics, 18.10.2020 15:01
Mathematics, 18.10.2020 15:01
English, 18.10.2020 15:01