Engineering, 12.12.2019 05:31 jwyapo4

How does each of the following influence the tensile modulus of a semicrystalline polymer? (a) molecular weight decrease (b) degree of crystallinity increase (c) deformation by drawing (d) annealing of an undeformed material (e) annealing of a drawn material a. (a) - non-direct influence, (b) - increase, (c) - decrease, (d) - increase, (e) - decrease b. (a) - non-direct influence, (b) - increase, (c) - decrease, (d) - decrease, (e) - decrease c. (a) - increase, (b) - decrease,(c) - decrease, (d) - increase, (e) - decrease d. (a) - non-direct influence, (b) - increase, (c) - increase, (d) - increase, (e) - decrease

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

You know the right answer?

How does each of the following influence the tensile modulus of a semicrystalline polymer? (a) mole...

Questions