For a lead–tin alloy of composition 80 wt% sn–20 wt% pb and at 180°c (355°f) ,
(a) deter...
Engineering, 12.12.2019 01:31 sevaramirabell
For a lead–tin alloy of composition 80 wt% sn–20 wt% pb and at 180°c (355°f) ,
(a) determine the mass fractions of the α and β phases.
(b) determine the mass fractions of primary β andeutectic microconstituents.
(c) determine the mass fraction of eutectic β.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
Questions
Mathematics, 29.01.2021 07:10
Physics, 29.01.2021 07:10
Mathematics, 29.01.2021 07:10
Business, 29.01.2021 07:10
Advanced Placement (AP), 29.01.2021 07:10
Mathematics, 29.01.2021 07:10
Health, 29.01.2021 07:20
Biology, 29.01.2021 07:20
Social Studies, 29.01.2021 07:20
Biology, 29.01.2021 07:20
