Flash separations are fundamental to any process separation train. a full steady-state pro- cess simulation consists largely of many consecutive flash calculations. use unifac to determine the temperature at which 20 mol% will be vaporized at 760 mmhg of an equimolar mixture liquid feed of n-pentane and acetone.

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux