subject
Engineering, 12.12.2019 00:31 doughboy123

10-19b with the increasing demand for xylene in the petrochemical industry, the production of xylene from toluene disproportionation has gained attention in recent years [ind. eng. chem. res., 26, 1854 (1987)]. this reaction, 2 toluene ⎯⎯→ benzene xylene catalyst 2t ⎯⎯→ b x was studied over a hydrogen mordenite catalyst that decays with time. as a first approximation, assume that the catalyst follows second-order decay rd kda2 and the rate law for low conversions is – r t′ = k t p t a with kt 20 g mol/h kg-cat atm and kd 1.6 h 1 at 735 k. (a) compare the conversion-time curves in a batch reactor containing 5 kg-cat at different initial partial pressures (1 atm, 10 atm, the reaction volume containing pure toluene initially is 1 dm3 and the temperature is 735 k. (b) what conversion can be achieved in a moving-bed reactor containing 50 kg of catalyst with a cat- alyst feed rate of 2 kg/h? toluene is fed at a pressure of 2 atm and a rate of 10 mol/min. (c) explore the effect of catalyst feed rate on conversion. (d) suppose that et 25 kcal/mol and ed 10 kcal/mol. what would the temperature–time trajec- tory look like for a cstr? what if et 10 kcal/mol and ed 25 kcal/mol?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
10-19b with the increasing demand for xylene in the petrochemical industry, the production of xylene...
Questions
question
Mathematics, 09.03.2021 23:00
Questions on the website: 13722365