subject
Engineering, 09.12.2019 22:31 bobokitty

A1.60 kg , horizontal, uniform tray is attached to a vertical ideal spring of force constant 195 n/m and a 290 g metal ball is in the tray. the spring is below the tray, so it can oscillate up-and-down. the tray is then pushed down 15.1 cm below its equilibrium point (call this point a) and released from rest. a) how high above point a will the tray be when the metal ball leaves the tray? (hint: this does not occur when the ball and tray reach their maximum speeds.)
b)how much time elapses between releasing the system at point a and the ball leaving the tray
c)how fast is the ball moving just as it leaves the tray?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
You know the right answer?
A1.60 kg , horizontal, uniform tray is attached to a vertical ideal spring of force constant 195 n/m...
Questions
question
Mathematics, 30.06.2021 05:10
question
English, 30.06.2021 05:10
question
Mathematics, 30.06.2021 05:10
question
Mathematics, 30.06.2021 05:10
question
Biology, 30.06.2021 05:10
Questions on the website: 13722367