Engineering, 06.12.2019 20:31 Arielledt10

Ahollow round cylindrical steel shaft sealed on both ends has an allowable shear stress of = 120 and transmits 200 n-m of torque. the cylinder is pressurized to 2.0 mpa. it rotates at 60 rpm. hint: neglect section 3-15 in your text.

a. if the inside diameter is 90% of the outside diameter, what is the outer and inner diameters? use preferred sizes for both. hint: neglect section 3-15 in your text. (4 points). assume a thin walled pressure vessel.

b. what is the shear stress on the inside diameter? (3 points). hint: neglect section 3-15 in your text.

c. what is the actual design factor (factor of safety) for the cylinder based upon the actual geometry (preferred sizes) of the cylinder?

d. how much power will be transmitted? (1 point)

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

You know the right answer?

Ahollow round cylindrical steel shaft sealed on both ends has an allowable shear stress of = 120 a...

Questions