subject
Engineering, 04.12.2019 23:31 maddie02294

Flue gas is cooled from 1373.15 k to 400 k and the heat is used to generate saturated steam at 100 °c in a boiler. the flue gas heat capacity is given by: cp /r = 3.83 + 0.000551t. water enters the boiler at 100 °c and is vaporized at this temperature, 100 °c. (its latent heat of vaporization is 2256.9 kj/kg).

a. with reference to the surrounding temperature of 15 °c, what is the lost work in units of kj/mol flue gas?

b. with reference to the surrounding temperature of 15 °c, what is the maximum work in kj/mol flue gas that can be accomplished by the saturated steam at 100 °c if it condenses only and does not subcool?

c. what is the maximum work theoretically obtainable from the flue gas itself as it cools from 1373.15 k to 4000 k? (the surrounding temperature at 15 °c)

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
question
Engineering, 06.07.2019 04:20
Consider a spherical container of inner radius , outer radius r2, and thermal conductivity k. express the boundary condition on the inner surface of the container for steady one-dimensional conduction for the following cases: (a) specified temperature of 50°c, (b) specified heat flux of 30 w/m2 toward the center, (c) convection to a medium at t with a heat transfer coefficient of h
Answers: 2
question
Engineering, 06.07.2019 04:30
Describe briefly, the concept of mass production in modern industrial system.
Answers: 1
You know the right answer?
Flue gas is cooled from 1373.15 k to 400 k and the heat is used to generate saturated steam at 100 °...
Questions
question
Arts, 11.01.2020 22:31
Questions on the website: 13722367