subject
Engineering, 04.12.2019 03:31 kat353

Acontinuous-time sinusoid x(t) is sampled at 5000 hz, which is above the nyquist rate a section of 512 samples is extracted from the sampled signal x[n], for example, x[n] for 1001 < n < 1512 then a 512-point dft is computed. the resulting 512-point dft xk] is nonzero only for k = 100, and for k = 412. determine the frequency (in hz) of the continuous-time signal x(t) the answer should be a positive number, with 4 or more significant digits. you can use fixed or exponential notation (e. g., 1574.5 or 1.5745e3) frequency (hz) of x(t) insert a numerical answer

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 06.07.2019 02:30
1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction
Answers: 1
question
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
You know the right answer?
Acontinuous-time sinusoid x(t) is sampled at 5000 hz, which is above the nyquist rate a section of 5...
Questions
question
Mathematics, 06.11.2020 17:10
question
Business, 06.11.2020 17:10
Questions on the website: 13722363