Engineering, 03.12.2019 23:31 manny2275
The winch on the truck is used to hoist the garbage bin onto the bed of the truck. if the loaded bin has a weight of 8500 lb and center of gravity at g, determine the force in the cable needed to begin the lift. the coefficients of static friction at a and b are ,mua = 0.2 and mub = 0.3 respectively. neglect the height of the support at a.
Answers: 3
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
The winch on the truck is used to hoist the garbage bin onto the bed of the truck. if the loaded bin...
Geography, 01.12.2019 23:31
History, 01.12.2019 23:31
History, 01.12.2019 23:31
Mathematics, 01.12.2019 23:31
Mathematics, 01.12.2019 23:31
Health, 01.12.2019 23:31
Physics, 01.12.2019 23:31
Chemistry, 01.12.2019 23:31
Mathematics, 01.12.2019 23:31
Biology, 01.12.2019 23:31