Load powerworld simulator case problem 6_46. plot the reactive power output of the generator at bus 2 as a function of its voltage setpoint value in 0.005 p. u. voltage steps over the range between its lower limit of 250 mvar and its upper limit of 50 mvar. to change the generator 2 voltage set point first select tools, play to begin the power flow simulation, and then click on the up/down arrows on the bus 2 magenta voltage setpoint field

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false