subject
Engineering, 03.12.2019 20:31 sharnisefrazier

For some viscoelastic polymers that are subjected to stress relaxation tests, the stress decays with time according to
σ(t) = σ(0) exp (-t/t)
where σ(t) and σ(0) represents the time-dependent and initial (i. e., time =0) stresses, respectively, and t and t denote elapsed time and the relaxation time; t is a time-independent constant characteristic of the material. a specimen of some viscoelastic polymer, the stress relaxation of which obeys this equation, was suddenly pulled in tension to a measured strain of 0.69; the stress necessary to maintain this constant strain was measured as function of time.
determine er (9) for this material, in mpa ,if the initial stress level was 3.9 mpa (560 psi) which dropped to 0.65 mpa (93 psi) after 46 s.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
You know the right answer?
For some viscoelastic polymers that are subjected to stress relaxation tests, the stress decays with...
Questions
question
Mathematics, 05.01.2021 01:00
question
English, 05.01.2021 01:00
Questions on the website: 13722366