subject
Engineering, 03.12.2019 18:31 SupremeNerdx

You are given designs of 3 caches for a 16-bit address machine: d1: direct-mapped cache. each cache line is 1 byte. 10-bit index, 6-bit tag. 1 cycle hit time. d2: 2-way set associative cache. each cache line is 1 word (4 bytes). 7-bit index, 7-bit tag. 2 cycle hit time. d3: fully associative cache with 256 cache lines. each cache line is 1 word. 14-bit tag. 5 cycle hit time. answer the following set of questions: a) what is the size of each cache? b) how much space does each cache need to store tags? c) which cache design has the most conflict misses? which has the least? d) the following information is given to you: hit rate for the 3 caches is 50%, 70% and 90% but did not tell you which hit rate corresponds to which cache, which cache would you guess corresponded to which hit rate? why?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
You know the right answer?
You are given designs of 3 caches for a 16-bit address machine: d1: direct-mapped cache. each cach...
Questions
question
Mathematics, 29.08.2019 03:30
question
Mathematics, 29.08.2019 03:30
Questions on the website: 13722362