subject
Engineering, 28.11.2019 05:31 madisonruh

Problem 5.024 a power cycle receives 1000 btu by heat transfer from a reservoir at 1500°f and discharges energy by heat transfer to a reservoir at 300°f. the thermal efficiency of the cycle is 75% of that for a reversible power cycle operating between the same reservoirs. (a) for the actual cycle, determine the thermal efficiency and the energy discharged to the cold reservoir, in btu b. repeat for the reversible cycle.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
You know the right answer?
Problem 5.024 a power cycle receives 1000 btu by heat transfer from a reservoir at 1500°f and discha...
Questions
question
Mathematics, 28.08.2020 21:01
question
Mathematics, 28.08.2020 21:01
question
Mathematics, 28.08.2020 21:01
Questions on the website: 13722367