Engineering, 28.11.2019 00:31 Cinders13

Verify that the line integral and the surface integral of stokes' theorem are equal for the following vector field, surface s, and closed curve c. assume that c has counterclockwise orientation and s has a consistent orientation. fequalsleft angle y comma font size decreased by 6 minus x comma font size decreased by 6 7 right angle; s is the upper half of the sphere x squaredplusy squaredplusz squaredequals4 and c is the circle x squaredplusy squaredequals4 in the xy-plane. construct the line integral of stokes' theorem using the parameterization r(t)equalsleft angle 2 cosine t comma font size decreased by 6 2 sine t comma font size decreased by 6 0 right angle, for 0less than or equalstless than or equals2pi for the curve c. choose the correct answer below. a. integral from 0 to 2 pi 4 font size decreased by 6 dt b. integral from 0 to 2 pi minus 4 font size decreased by 6 dt c. integral from 0 to 2 pi 8 font size decreased by 6 dt d. integral from 0 to 2 pi minus 8 font size decreased by 6 dt

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

You know the right answer?

Verify that the line integral and the surface integral of stokes' theorem are equal for the followin...

Questions