Engineering, 27.11.2019 20:31 Katmcfee7681
The two-pole machine has a field winding located on the stator and an armature winding on the rotor, with nf = 800 turns and na = 50 turns, respectively. it has a uniform air gap of 0.5 mm. the armature has a diameter of 0.5 m, and it is 1.5 m long. the field winding carries a current of 2 a. the rotor is driven at 3600 rpm.1) find the maximum flux linking one loop of winding.
2) find the frequency of the rotor induced voltage.
3) find the instantaneous voltage voltage induced in the rotor coil.
4) determine the rms voltage induced in the rotor coil.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
You know the right answer?
The two-pole machine has a field winding located on the stator and an armature winding on the rotor,...
Questions
Biology, 09.07.2019 13:30
History, 09.07.2019 13:30
History, 09.07.2019 13:30
Computers and Technology, 09.07.2019 13:30
Mathematics, 09.07.2019 13:30
Business, 09.07.2019 13:30
Mathematics, 09.07.2019 13:30
