Aconvergent–divergent nozzle is designed to expand air from a chamber in whichthe pressure is 700 kpa and the temperature is 35°c to give mach 1.6. the massflow rate through the nozzle under design conditions is 0.012 kg/s. finda. the throat and exit areas of the nozzle b. the design back-pressure and the temperature of the air leaving the nozzlewith this back-pressurec. the lowest back-pressure for which there will be no supersonic flow in thenozzled. the back-pressure below which there are no shock waves in the nozzle

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.