subject
Engineering, 27.11.2019 02:31 akatherine1738

One and one-half pounds of water within a piston–cylinder assembly execute a carnot power cycle. during isothermal expansion, the water is heated at 500 f from saturated liquid to saturated vapor. the vapor then expands adiabatically to a temperature of 100 f and a quality of 70.38%.

(a) sketch the cycle on p–v coordinates.
(b) evaluate the heat transfer and work for each process, in btu.
(c) evaluate the thermal efficiency.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
You know the right answer?
One and one-half pounds of water within a piston–cylinder assembly execute a carnot power cycle. dur...
Questions
Questions on the website: 13722367