A5-in. diameter, gray cast iron cylindrical part is to be turned on a lathe at 500 rpm. the depth of cut is 0.25 in. and the feed is 0.02 in./rev. what power (hp) is required for this operation? assume that the energy requirement for machining cast irons is 2.0 hp. min/in3 . [hint: the power (hp) = energy per unit vol. multiplied by mrr].

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.