subject
Engineering, 25.11.2019 22:31 langel7373

Adistillation column with 100 kmol/h feed of 41 mole % a (and the rest b) produces a distillate product with xd = 0.92 and a bottom stream with xbot = 0.05 of the more volatile species a. cmo is valid and the equilibrium data is give by y = ax/[1+(a-1)x], where a = 2.86.
a) if the feed is saturated liquid, determine the minimum reflux ratio.
b) if the feed is saturated vapor, determine the minimum reflux ratio. for question c and d, the reflux ratio is 1.5 and the feed is a saturated mixture with q = 0.45.
c) determine the liquid flow rate lbar in the stripping section of the column.
d) determine the mole fraction of a in the vapor stream entering the top equilibrium stage.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
Adistillation column with 100 kmol/h feed of 41 mole % a (and the rest b) produces a distillate prod...
Questions
question
Mathematics, 03.09.2020 18:01
question
Mathematics, 03.09.2020 18:01
Questions on the website: 13722367