Engineering, 25.11.2019 21:31 markeishamarsh4
Water flows through a thick-walled tube with an inner diameter of 12 mm and a length of 8 m. the tube is immersed in a well-stirred, hot reaction tank maintained at 85 degree c, and the conduction resistance of the tube wall (based on the inner surface area) is r_cond = 0.002 (m^2 k)/w. the inlet temperature of the process fluid is t_m, i = 20 degree c. and the flow rate is 33 kg/h. estimate a) what is the outlet temperature of the water for this condition? b) what would be the error you would have made if you assumed fully developed conditions to determine that outlet temperature?
Answers: 1
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Water flows through a thick-walled tube with an inner diameter of 12 mm and a length of 8 m. the tub...
History, 19.09.2019 04:30
History, 19.09.2019 04:30
Mathematics, 19.09.2019 04:30
World Languages, 19.09.2019 04:30
Social Studies, 19.09.2019 04:30
English, 19.09.2019 04:30