subject
Engineering, 25.11.2019 21:31 mem8163

The doping concentrations in a silicon pn junction are nd = 5 times 1015 cm-3 and na = 5 times 1016 cm-3. the minority carrier concentration at either space charge edge is to be no larger than 10 percent of the respective majority carrier concentration. determine the maximum forward-bias voltage that can be applied to the junction and still meet the required specifications. is the n-region or p-region concentration the factor that limits the forward-bias voltage? repeat part (a) if the doping concentrations are nd = 3 times 1016 cm-3 and na = 7 times 1015 cm-3.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
The doping concentrations in a silicon pn junction are nd = 5 times 1015 cm-3 and na = 5 times 1016...
Questions
question
Mathematics, 02.09.2021 17:20
Questions on the website: 13722360