Engineering, 22.11.2019 21:31 DesperatforanA

Uniformly distributed dead load: 1 kip/ft
• uniformly distributed live load: 3 kip/ft (this can move anywhere. it can be present or absent anywhere. place it for maximum influence)
• (1) 10 kip live point load (it can move anywhere, but there’s only one 10kip load. place it for maximum influence, in each case)
1. draw the influence line for the vertical reaction at a, then determine the maximum positive (upward) and negative (downward) reaction magnitudes at a, as applicable, given the following loads: note: pinned foundation at a, roller foundation at b, pinned connection at c, roller foundation at d.
2. draw the influence line for the internal shear at pinned connection c, then determine the range of shear magnitudes at c.
3. draw the influence line for the internal moment at e, then determine the maximum positive and negative moments at e.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

You know the right answer?

Uniformly distributed dead load: 1 kip/ft
• uniformly distributed live load: 3 kip/ft (this...

Questions