subject
Engineering, 22.11.2019 17:31 lilyrockstarmag

If we recreated the scene from fast & furious 7 and dropped a challenger srt® hellcat redeye widebody from a c-130 aircraft at 5,280 ft, how much horsepower would it take to drive past it before it hits the ground if you're 1 mile away? pro tips air density @ sea level, 59 degrees, no wind = p = .002377 slugs/ft^3 coefficient of drag (flat plate, nasa) = c(d) = 1.28 weight = w = 4451 lbs gravitation constant = g = 32.2 ft/sec^2 area = a = 197.5" long x 78.2" wide x (1 ft^2/ 144 in^2) vehicle falls flat, wheels 1st, straight down, at constant acceleration with no aerodynamic drag until terminal velocity horsepower needed to accelerate is average - not peak 100% driveline efficiency

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
You know the right answer?
If we recreated the scene from fast & furious 7 and dropped a challenger srt® hellcat redeye wi...
Questions
question
Mathematics, 07.03.2021 01:00
question
English, 07.03.2021 01:00
question
Mathematics, 07.03.2021 01:00
question
Mathematics, 07.03.2021 01:00
question
English, 07.03.2021 01:00
Questions on the website: 13722367