Engineering, 21.11.2019 03:31 kprincess16r
Air at 3.0 × 10-4 kg/s and 27°c enters a rectangular duct that is 1.0 m long and 4 mm x 16 mm on a side. a uniform heat flux of 600 w/m2 is imposed on the duct surface. what are the temperatures of the air and of the duct surface at the outlet? the temperature of the air at the outlet, in k: the temperature of the duct surface at the outlet, in k:
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
You know the right answer?
Air at 3.0 × 10-4 kg/s and 27°c enters a rectangular duct that is 1.0 m long and 4 mm x 16 mm on a s...
Questions
Biology, 31.12.2020 20:10
Mathematics, 31.12.2020 20:10
Chemistry, 31.12.2020 20:10
Health, 31.12.2020 20:10
Geography, 31.12.2020 20:10
Physics, 31.12.2020 20:10
