subject
Engineering, 21.11.2019 02:31 famouzgal

Consider steady, incompressible, laminar flow of a newtonian fluid in an infinitely long round pipe annulus of inner radius ri and outer radius ro ignore the effects of gravity. a constant negative pressure gradient _p/_x is applied in the x-direction, (∂p/∂x)=(p1-p2)/(x2-x1) where x1 and x2 are two arbitrary locations along the x-axis, and p1 and p2 are the pressures at those two locations. the pressure gradient may be caused by a pump and/or gravity. note that we adopt a modified cylindricaloordinate system here with x instead of z for the axial component, namely, ( r, θ ,x) and (ur, uθ ,ux) derive an expression for the velocity field in the annular space in the pipe.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
Consider steady, incompressible, laminar flow of a newtonian fluid in an infinitely long round pipe...
Questions
question
Mathematics, 01.02.2021 20:20
Questions on the website: 13722361