Engineering, 19.11.2019 07:31 Arealbot
Stresses exerted by brain tumors on neighboring normal brain tissue can cause serious complications. to estimate these stresses, consider a simple model for a growing brain tumor. bars constrained between the rigid sides of the skull represent the tumor (elastic modulus e1) and the brain (elastic modulus e2). at time t = 0, the lengths of the tumor and brain are l1 and l2, respectively, and the bars have equal cross-sectional areas a. l1 skull tumor brain skull l2 (a) suppose tumor growth is represented by a thermal strain t . in terms of t , compute the stress in the brain due to the growing tumor. (b) for a given t , what is the length of the tumor? (c) assume t = a(1 − exp(− where t is time and a and b are constants, and consider the following parameter values:
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Stresses exerted by brain tumors on neighboring normal brain tissue can cause serious complications....
Questions
Health, 18.01.2021 21:20
Chemistry, 18.01.2021 21:20
Computers and Technology, 18.01.2021 21:20
Mathematics, 18.01.2021 21:20
