Engineering, 19.11.2019 06:31 XxKaitlynnxX

Water at 25°c and 1 atm is flowing over a long flat plate with a velocity of 26 m/s. determine the distance from the leading edge of the plate where the flow becomes turbulent, and the thickness of the boundary layer at that location. the density and dynamic viscosity of water at 1 atm and 25°c are rho = 997 kg/m3 and μ = 0.891×10–3 kg/m-s. a)the distance from the leading edge of the plate where the flow becomes turbulent is 1.8cm. the thickness of the boundary layer at that location is 0.5mm. b)the distance from the leading edge of the plate where the flow becomes turbulent is 1.9cm. the thickness of the boundary layer at that location is 0.4mm. c)the distance from the leading edge of the plate where the flow becomes turbulent is 1.7cm. the thickness of the boundary layer at that location is 0.1mm. d)the distance from the leading edge of the plate where the flow becomes turbulent is 1.6cm. the thickness of the boundary layer at that location is 0.3mm.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

You know the right answer?

Water at 25°c and 1 atm is flowing over a long flat plate with a velocity of 26 m/s. determine the d...

Questions