Engineering, 18.11.2019 22:31 mari33312

The national health statistics reports dated oct. 22, 2008, included the following information on the heights (in.) for non-hispanic white females: age sample size sample mean std. error mean 20–39 866 64.9 0.09 60 and older 934 63.1 0.11 (a) calculate and interpret a confidence interval at confidence level approximately 95% for the difference between population mean height for the younger women and that for the older women. (b) let µ1 denote the population mean height for those aged 2039 and µ2 denote the population mean height for those aged 60 and older. interpret the hypotheses h0 : µ1 − µ2 = 1 and ha : µ1 − µ2 > 1, and then carry out a test of these hypotheses at significance level 0.05 using the confidence interval in (a).

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

You know the right answer?

The national health statistics reports dated oct. 22, 2008, included the following information on th...

Questions