Engineering, 16.11.2019 01:31 emojilover8188
In an undrained triaxial test on a soil specimen the constant cell pressure was 200 kpa. when the piston load was 320 n the length of the specimen was 65 mm. if the original length and diameter of the specimen were 78mm and 38mm respectively, determine at the above piston load:
a) cross-sectional area of the specimen.
b) deviator stress.
c) major principal total stress.
d) maximum shear stress.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
In an undrained triaxial test on a soil specimen the constant cell pressure was 200 kpa. when the pi...
Questions
History, 27.08.2019 06:00
Mathematics, 27.08.2019 06:00
Mathematics, 27.08.2019 06:00
Social Studies, 27.08.2019 06:00
Mathematics, 27.08.2019 06:00
Mathematics, 27.08.2019 06:00
English, 27.08.2019 06:00
Geography, 27.08.2019 06:00
English, 27.08.2019 06:00
English, 27.08.2019 06:00
