Engineering, 15.11.2019 06:31 dannyhouseman55
Consider a beam made of 7075-t6 aluminum with h = 1 in, and thickness t. the plane strain fracture toughness for the material is 26 and yield strength is 75 ksi. find the nominal bending moment m to fracture the beam for crack lengths a = 0.10, 0.20 and 0.30 in, and plate thicknesses of t = 0.10, 0.20 and 0.30 in. find the plastic zone radius and ratio for all cases at the point of fracture. can you justify linear elastic fracture mechanics assumption at the crack tip based on
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
Consider a beam made of 7075-t6 aluminum with h = 1 in, and thickness t. the plane strain fracture t...
Questions
History, 16.11.2020 17:20
Biology, 16.11.2020 17:20
