Engineering, 14.11.2019 06:31 marissagirl9893

7a very large thin plate is centered in a gap of width 0.06 m with different oils of unknown viscosities above and below; one viscosity is twice the other. when the plate is pulled at a velocity of 0: 3 m=s, the resulting force on one square meter of plate due to the viscous shear on both sides is 29 n. assuming viscous flow and neglecting all end effects, calculate the viscosities of the oils.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

You know the right answer?

7a very large thin plate is centered in a gap of width 0.06 m with different oils of unknown viscosi...

Questions