Engineering, 13.11.2019 20:31 yvngtazz
An inexpensive food and beverage container is fabricated from 25-mni-thick polystyrene (k = 0.023 w/m k) and has interior dimensions of 0.8 m times 0.6 m times 0.6 m. under conditions for which an inner surface temperature of approximately 2 degree c is maintained by an ice-water mixture and an outer surface temperature of 20 degree c is maintained by the ambient, what is the heat flux through the container wall? assuming negligible heat gain through the 0.8 m times 0.6 m base of the cooler, what is the total heal load for the prescribed conditions?
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
You know the right answer?
An inexpensive food and beverage container is fabricated from 25-mni-thick polystyrene (k = 0.023 w/...
Questions
English, 09.04.2020 21:01
Mathematics, 09.04.2020 21:01
History, 09.04.2020 21:01
English, 09.04.2020 21:01
Mathematics, 09.04.2020 21:01
Mathematics, 09.04.2020 21:01
Mathematics, 09.04.2020 21:01
English, 09.04.2020 21:02
Biology, 09.04.2020 21:02
