Engineering, 13.11.2019 19:31 eddie828

Athin–walled cylindrical pressure vessel of inner radius r and thickness t r is subjected to an internal pressure p. the pressure vessel is made from steel which has elastic material constants e = 200 gpa and ν = 0.30. if the vessel has a length ` = 3 m, an inner radius of r = 0.65 m, and a wall thickness t = 15 mm, determine the following items for a pressure p = 25 mpa. assume that elongation is positive and contraction is negative.
(a) determine the hoop (circumferential) strain in the pressure vessel.
(b) determine the axial (longitudinal) strain in the pressure vessel.
(c) determine change in the circumference of the pressure vessel caused by the internal pressure.
(d) determine the change in the outer diameter of the pressure vessel caused by the internal pressure.
(e) determine the change in the length of the pressure vessel caused by the internal pressure.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

Athin–walled cylindrical pressure vessel of inner radius r and thickness t r is subjected to an inte...

Questions