Engineering, 13.11.2019 05:31 xocupcake309174
If a filter has unity gain (i. e. 0 db) in its passband, you know that the frequency at which the output has half the amplitude of the input is known as the cutoff frequency. hence, the gain is −3 db at the cutoff frequency. however, if the maximum gain in the passband is not 0 db, the cutoff frequency is the point where the gain is 3 db lower than the maximum gain. when measuring cutoff frequency from the bode plot, if you notice that the maximum gain is 8 db, then what is the gain at the cutoff frequency?
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
You know the right answer?
If a filter has unity gain (i. e. 0 db) in its passband, you know that the frequency at which the ou...
Questions
English, 28.02.2020 19:22
Chemistry, 28.02.2020 19:22
Social Studies, 28.02.2020 19:22
English, 28.02.2020 19:22
Mathematics, 28.02.2020 19:22
