Engineering, 13.11.2019 01:31 tigermath85

Pressurized water is often available at elevated temperatures and may be used for space heating or industrial process applications. in such cases it is customary to use a tube bundle in which the water is passed through the tubes, while air is passed in cross flow over the tubes. consider a staggered arrangement for which the tube outside diameter is 16.4 mm and the longitudinal and transverse pitches are sl = 20.5 mm and st = 20.5 mm. there are seven rows of tubes in the airflow direction and eight tubes per row. under typical operating conditions the cylinder surface temperature is at 70 degree c, while the air upstream temperature and velocity are 15 degree c and 6 m/s, respectively. determine the air-side convection coefficient and the rate of heat transfer for the tube bundle. what is the air side pressure drop?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

You know the right answer?

Pressurized water is often available at elevated temperatures and may be used for space heating or i...

Questions