subject
Engineering, 12.11.2019 22:31 shahfaisal

Liquid nitrogen at 77 k is stored in an insulated spherical vessel that is vented to the atmosphere. the container is made of a thin-walled material with an outside diameter of 0.5 m; 25 mm of insulation (k = 0.002 w / m k) covers the outside surface. the latent heat of nitrogen is 200 kj/kg and its liquid phase density is 804 kg/m3. for surroundings at 25oc and a convective heat transfer coefficient (h = 18 w / m2) at the outside surface of the insulation, what is the rate of liquid nitrogen boil-off? report your answer in cm3 (of liquid)/hr.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
question
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Liquid nitrogen at 77 k is stored in an insulated spherical vessel that is vented to the atmosphere....
Questions
question
Mathematics, 11.07.2019 22:10
Questions on the website: 13722363